| Products Range |
| |
| ENERGY PRODUCT |
| |
 |
Coal |
 |
Energy Coal, also known as steaming or thermal coal, is used as a fuel source in electrical power generation, cement manufacture and various industrial applications.
Anthracite Coal is a hard, compact variety of mineral coal with the highest carbon & calorific content and likewise contains the fewest impurities when compared to all other varieties.
|  |
|
|
| |
| FERROUS BASED PRODUCTS |
| |
|
Scrap |
 |
4C Bales
New production compressed steel less than 6mm thick in bales. |
|
|
|
 |
 |
Plate & Structural & OA ISRI 231/237
Cut structural and plate scrap 5 feet and under (ISRI231) or 2 feet and under (ISRI237). |
|
|
|
|
 |
Iron Ore
material from which iron can be extracted, usually found on the form of magnetite (Fe³O4) or hematite (Fe²O³), both of which are iron oxides. |
|
|
|
|
 |
Iron Sands
Classified as a type of sand with heavy concentrations of iron. Typically dark grey or blackish in colour & comprises mainly magnetite (Fe³O4). |
|
|
|
| |
| PIG IRON |
 |
Pig Iron
Intermediate product of smelting iron ore with a high-carbon fuel resulting in a high carbon content of typically 3.5–4.5%. |
|
|
|
| |
| DRI & HBI |
 |
DRI & HBI
Direct-reduced iron (DRI) produced from direct reduction of iron ore. Hot-briquetted iron (HBI) is a compacted form of DRI designed for ease of shipping, handling, and storage. |
|
|
|
| |
| FERRO ALLOYS |
 |
Ferro Alloys
Alloys of iron with chromium, manganese, silicon, tungsten, molybdenum or vanadium. Used in steelmaking as a means of introducing these alloying elements into the cast or as deoxidisers. |
|
|
|
| |
| HOT /COLD ROLLED COILS |
 |
Hot / Cold Rolled Coils
The terms hot rolled & cold rolled refers to the processing of the material either above or below the relevant recrystallization temperature of that material. Coils can be supplied of various types and specifications according to requirements. |
|
|
|
| |
| WIRE RODS |
 |
Wire Rods
These are supplied to the wire producing industry including cold heading applications, high carbon wires for bedding and seating and baling applications and finally low to medium carbon wire applications for end usage such as fencing wire, plating quality wires and general wire products. |
|
|
|
| |
| REBARS |
 |
Rebars
Steel Reinforcing Bars (Rebars) is a common steel bar and is commonly used as a tensioning device in the construction industry for reinforced concrete and reinforced masonry structures holding the concrete in compression. |
|
|
|
| |
| BILLETS |
 |
Billets
These primary steel products are normally sold in bulk shipments for onward production into long products, and forging applications. The billets can be supplied in varying sizes and grades as required. |
|
|
|
| |
| MESH REINFORCEMENT |
 |
Mesh Reinforcement
A steel reinforcement material in concrete, mesh is a prefabricated reinforcement consisting of a series of parallel longitudinal wires with accurate spacing welded to cross wires at the required spacing and can be supplied to varying specifications. |
|
|
|
| |
